The three-week intervention by the Nigeria Sugar Institute (NSI) combined classroom instruction, field demonstrations and laboratory exercises to equip young professionals with practical competencies for sugarcane production and estate operations.
Nigeria’s ambition to strengthen domestic sugar production depends not only on investments in plantations, processing facilities and machinery but also on the availability of skilled professionals capable of managing the entire production chain.
Recognising the importance of this technical foundation, the Nigeria Sugar Institute (NSI), an institution of the National Sugar Development Council (NSDC), has intensified efforts to develop industry-specific human capacity through a specialised training programme for graduate trainees of the Lafiagi Sugar Company (LASUCO), a subsidiary of BUA Foods Plc.
The intervention, delivered under the BUA Graduate Agriculture Training and Transfer Programme (AGATTP), provided 15 graduate trainees with intensive instruction in sugarcane field operations, agricultural management, irrigation, mechanisation and laboratory analysis.
Conducted between August 24 and September 11, 2026, the 18-day programme was designed to bridge the gap between general agricultural knowledge and the specialised technical skills required to operate a commercial sugar estate.
Beyond classroom lectures, the training combined field demonstrations at the LASUCO Estate in Lafiagi, Kwara State, with practical laboratory sessions at the NSI facilities in Ilorin. All 15 participants completed the programme and received certificates, with five earning Distinctions and the remaining ten securing Credit grades.
The exercise represents a practical example of NSI’s technical training assistance to industry operators, supporting the development of a workforce capable of translating agricultural knowledge into improved estate operations.
Building the human capital foundation for sugar production
The training reflects the strategic responsibility assigned to NSI under the National Sugar Master Plan (NSMP), which includes developing the technical human capital required to move Nigeria’s sugar industry progressively from import dependence towards increased domestic production.
For LASUCO, the intervention came at a significant stage in the development of its sugar operations at Lafiagi. The estate, established in 1977 and acquired by BUA in 2008, is undergoing rehabilitation and expansion as the company builds its cane blocks, milling capacity and workforce.
The expansion of a commercial sugar estate requires more than the availability of land and production equipment. It also demands professionals who understand sugarcane varieties, soil conditions, irrigation systems, planting methods, crop protection, harvesting cycles and the technical procedures required to maintain productivity.
It was against this background that NSI developed the specialised programme for the 15 graduate trainees drawn from disciplines including Agronomy, Crop Production, Agricultural Extension, Soil Science, Agricultural Economics, Agricultural and Bio-resources Engineering, and General Agriculture.
The programme was structured to equip the participants with competencies relevant to the operational demands of a modern sugar estate, while providing a foundation for their eventual deployment into specialised technical roles.
From classroom instruction to practical field experience
A major feature of the NSI intervention was its emphasis on combining theoretical instruction with practical exposure to the conditions and equipment found in commercial sugarcane production.
The first phase of the programme took place at the LASUCO Estate in Lafiagi, where participants received classroom instruction and participated in field-related activities.
The curriculum covered 12 major training days, each organised around three submodules, addressing the essential stages of sugarcane field operations.
Participants were introduced to sugarcane agronomy, plant morphology, growth phases, climate and soil requirements, water requirements, commercial varieties and yield estimation.
Other areas included farm machinery, irrigation methods and technologies, irrigation design and installation, seed cane management, land development, planting methods, tractor and farm implement management, drainage systems and weed control.
The training also addressed major sugarcane pests and diseases, irrigation system selection, harvesting and post-harvest handling, ratoon crop management, cane composition and maturity, nutrient management, farm safety and basic agricultural economics.
These subjects were particularly relevant to the operational responsibilities of the estate, where decisions on land preparation, planting, water management, crop protection and harvesting influence the productivity of the cane fields.
The programme also exposed participants to the identification of weeds and pests, cane sampling, irrigation and drainage infrastructure, and the use of drone and Geographic Information System (GIS) applications in field operations.
At the machinery yard, participants examined the estate’s land development machinery, harvester, sugarcane planter, boom sprayer and other crop management equipment.
The practical exposure was intended to familiarise the graduates with the machinery and operational processes they would encounter in their professional assignments.
Weather conditions disrupted some scheduled field demonstrations, but the training team adjusted the programme, including arranging a machinery-yard session to compensate for a practical exercise that could not take place because of rainfall.
Laboratory training strengthens technical competence
The second phase of the programme, held at NSI’s laboratories in Ilorin, provided participants with exposure to the analytical side of sugarcane production.
This component was important because effective sugarcane cultivation requires more than field management. It also depends on the ability to assess soil conditions, understand crop composition and interpret quality indicators that inform agricultural and processing decisions.
Following a laboratory induction covering safety procedures, soil sampling, Good Laboratory Practice (GLP), chemical hazard awareness and the use of personal protective equipment, the participants were divided into three groups for practical rotations.
The groups worked through the institute’s Soil Laboratory, Sugar Laboratory and Plant Laboratory, ensuring that every participant had exposure to the three facilities.
The laboratory sessions introduced the trainees to procedures and instruments used in soil and cane quality analysis. The programme’s learning objectives included soil pH, electrical conductivity, organic carbon, particle-size distribution, available phosphorus and total nitrogen, as well as sugarcane juice Brix, Pol and Purity measurements.
Participants also received exposure to plant Brix gradients and SPAD chlorophyll assessment.
These analytical competencies are relevant to decisions on soil suitability, nutrient requirements, crop performance and cane quality. They also provide a technical basis for understanding the relationship between field production and the quality of sugarcane supplied for processing.
The laboratory phase concluded with group presentations in which participants discussed the technical knowledge acquired during their rotations and responded to questions from facilitators and the institute’s leadership.
By taking the trainees from the field environment into specialised laboratories, NSI sought to provide a more comprehensive understanding of sugarcane operations, linking production activities with the scientific measurements that support them.
The 50-hectare cane field challenge
The programme’s practical orientation was further demonstrated through its capstone assessment, tagged “My Cane Field”.
For this exercise, each participant was required to develop a comprehensive operational plan for a 50-hectare sugarcane unit.
The assignment required them to integrate the major areas covered during the training, including land preparation, variety selection, planting, irrigation, nutrient management, crop protection, harvesting and ratoon management.
They were also required to incorporate budgeting and risk assessment into their proposed farm development plans.
The exercise tested the participants’ ability to connect individual training modules and apply them to a realistic sugarcane production scenario.
All 15 participants submitted completed capstone booklets before undertaking the final written examination, which consisted of 60 multiple-choice questions covering the programme’s four major subject areas.
The assessment framework also considered practical competency sign-offs, participants’ workbooks and class participation, ensuring that certification was not based solely on performance in a written examination.
Performance Results Identify Strengths and Areas for Further Support
The outcome of the programme showed that all 15 participants met the certification requirements.
Five participants, representing 33 per cent of the cohort, achieved Distinction, while ten participants, representing 67 per cent, obtained Credit. None finished below the Credit classification.
Faith Timileyin Afolayan emerged as the overall top performer, recording a final classification score of 89.9 per cent and the highest capstone score of 93 out of 100.
The report recorded a final classification mean of 77.9 per cent for the cohort. It also noted that participants recorded a mean score of 73.7 per cent in the 60-question technical final assessment.
The report cautioned against treating the Day 1 foundational assessment and the final examination as a direct measure of learning gain because the two tests were designed at different levels of difficulty. While the baseline test focused largely on identification, definitions and basic recall, the final assessment tested more demanding technical calculations, scenario diagnosis and applied judgement.
The subject-level results provided a useful picture of the cohort’s technical strengths and areas requiring additional attention.
Land Development, Mechanisation and Farm Management recorded the highest performance, with a cohort score of 83.6 per cent. Irrigation, Drainage and Water Resource Management followed with 77.8 per cent, while Sugarcane Agronomy and Crop Management recorded 68 per cent.
Quality Control and Instrumentation was the weakest subject, with 61.8 per cent.
The results provide a basis for NSI and LASUCO to identify areas where further technical assistance and specialised training could improve the graduates’ capacity.
Interestingly, participants’ module feedback ratings also improved during the programme, rising from a Day 1 average of 4.31 out of five to sustained ratings above 4.9 from Day 9 onwards. Several modules recorded perfect ratings.
Matching graduates with operational responsibilities
An important outcome of the training was the development of a deployment framework to guide LASUCO in assigning the graduates to areas where their academic backgrounds and demonstrated technical strengths could be best utilised.
Rather than treating the trainees as a single group, the NSI report mapped them to three functional areas of the estate: Agronomy and Crop Management; Farm Mechanisation and Land Development; and Irrigation and Water Resource Management.
The Agronomy and Crop Management team is expected to handle activities such as variety selection, seed cane management, planting decisions, crop growth monitoring, weed and pest control, harvesting and ratoon operations.
The Farm Mechanisation and Land Development team will support land preparation, machinery and implement selection, maintenance, mechanisation workflows, development of new cane blocks and related farm records.
The Irrigation and Water Resource Management team will focus on irrigation scheduling, drainage, pump-station and pivot operations, water management and the soil-water analysis required to guide irrigation decisions.
The deployment recommendations were based on participants’ final assessment scores in the relevant subjects, as well as their academic disciplines and professional orientation.
For instance, Usman Yusuf, an Agricultural and Bio-resources Engineering graduate, recorded a perfect score in Land Development, Mechanisation and Farm Management, as well as Irrigation, making him a strong candidate for both operational areas.
Similarly, Odewole Abdulmumeen Olasunkanmi recorded the highest score in the agronomy subject, while Faith Timileyin Afolayan combined strong overall performance with the highest capstone result.
The framework is intended to help LASUCO translate the training investment into practical contributions across the estate’s technical operations.
Beyond certification: mentorship and continuous capacity development
For NSI, the completion of the training programme is not the end of the capacity-building process. The report emphasises that the real value of the intervention will depend on how effectively the graduates apply their new competencies in the workplace.
It therefore recommends that LASUCO deploy the 15 graduates into substantive technical roles within two weeks of certification, using the proposed functional deployment classification as a guide.
The report also recommends activating a three-month post-programme mentorship arrangement discussed with LASUCO before the training. Under the arrangement, each graduate is to be paired with a senior technical officer in the relevant functional team to support the application of the newly acquired skills.
At the end of the mentorship period, the graduate, senior mentor and NSI Programme Coordinator are expected to hold a review conversation to assess progress and identify areas requiring further support.
NSI also recommends a three-month follow-up visit to LASUCO to observe the graduates at work, engage them on how they are applying the training and assess the transfer of knowledge into the estate’s operations.
Further training has also been proposed to consolidate the competencies acquired during the programme.
Given the cohort’s performance in Quality Control and Instrumentation, the report recommends an advanced NSI-hosted programme for all 15 graduates within six to nine months. The proposed areas include ICUMSA analytical procedures, polarimetry and refractometry, Purity and CCS calculations, advanced soil analysis methods, and instrument calibration and maintenance.
Other proposed pathways include advanced irrigation and water resource management for graduates whose disciplines and performance support that specialisation, as well as advanced sugarcane agronomy, variety development and crop protection for those with relevant backgrounds.
Additional short courses in farm business and records, presentation skills and precision agriculture are also recommended.
Strengthening NSI’s technical assistance model
The experience also provides lessons for improving the delivery of future technical training programmes.
The report recommends that NSI institutionalise some of the adjustments that proved effective during the exercise, including scheduling calculation-intensive modules in the morning, combining closely related subjects where appropriate and retaining the rotating facilitator model.
It also identifies the need for improved preparatory site assessments, more effective logistics planning, reliable training equipment and stronger contingency arrangements for field practicals affected by weather.
These recommendations are aimed at making future training interventions more efficient and ensuring that the institute can deliver specialised instruction consistently, whether at its own facilities or at partner estates.
The report further highlights the importance of addressing the identified weakness in Quality Control and Instrumentation through curriculum review and targeted refresher training.
Such follow-up measures would enable NSI to use the findings from each training cycle to improve its programmes and respond more directly to the technical needs of the sugar industry.
A strategic investment in Nigeria’s sugar industry
The NSI technical training assistance to LASUCO illustrates the importance of building professional capacity alongside the physical expansion of sugar production infrastructure.
As Nigeria seeks to strengthen domestic sugar production, the availability of trained personnel capable of managing plantations, machinery, irrigation systems, crop health and laboratory processes will remain a critical part of the industry’s development.
The 15 graduates represent a pool of emerging technical professionals whose knowledge can support LASUCO’s field operations if the recommended deployment, mentorship and further training arrangements are implemented.
For NSI, the programme demonstrates how its institutional mandate under the National Sugar Master Plan can be translated into practical support for industry operators through specialised training, technical assessment and follow-up capacity development.
Ultimately, the success of the intervention will be measured not only by the number of certificates issued or the scores achieved by the participants, but by the extent to which the graduates apply their competencies to improve the management and productivity of the Lafiagi sugar estate.
The transition from training to effective workplace application will therefore be the next important test of the partnership between NSI and LASUCO — and a practical measure of how technical human-capital development can contribute to the long-term growth of Nigeria’s domestic sugar industry.
For more pictures:
https://drive.google.com/drive/folders/1GydYWtH5yANiOb_gQiam13dE6WK17a5A
https://drive.google.com/drive/folders/1LHKVBeybj0N91xt9kNDQNqpfzKHcrc5U
